The Best Types of Honeysuckle Vines and How To Grow It In The Garden

Honeysuckle Vine-We all tend to recognize the honeysuckle fragrance, and that amazing nectar taste just ends up being very distinct and impressive. It’s important to note that the honeysuckle plants are tolerant of heat and they do tend to be visually enticing.

They are great for any landscape area, not to mention that they do bring in a distinct visual appeal. The honeysuckles pertain to a very large family of plants that also include vines and shrubs. You can find these in many regions all over the US. In fact, you can see around 180 variations here alone.

The great thing here is that growing the honeysuckle vines is not that hard; it can be relatively easy if you have the right approach and a good set of tools in order to do this properly.

1. Types of Honeysuckle Vines

A thing to keep in mind here is that these vines are climbers and they do end up pertaining to multiple varieties. They always tend to bring in a special fragrance, and you will appreciate their unique appeal, not to mention that the fruit is also very impressive and appealing for birds and mammals alike.

These tend to grow fast if you have fences or trellises. Anything that can offer them support and protection against low temperatures will be perfect for them!

a. Trumpet Honeysuckle

Called Lonicera sempervirens, the Trumpet Honeysuckle is evergreen. It also has trumpet shaded flowers that are coral to red. Another thing to note is that the hummingbirds come very often to these flowers that are lined with a yellow to gold color.

Some other birds are attracted by this plant, mostly because it creates blackberries during the fall. This Honeysuckle likes partial shade and a bit of sun, and it can grow very well in moist soil like the one you can find in the Agriculture Zone 4 in the US.

b. Dropmore Scarlet Honeysuckle

Dropmore Scarlet honeysuckles are blooming in zones 3-8. These have trumped shaped tangerine flowers that boom during the late spring and they do continue until the colder times arrive. They also attract butterflies and hummingbirds, which is very helpful for pollination.

They have red berries, and these tend to be very attractive for other birds too. The Scarlet Honeysuckle is known to grow very fast if you have a fence facing west and if you offer it enough shade and a bit of sun.

c. Graham Thomas Honeysuckle

Graham Thomas honeysuckle is named Lonicera periclymenum, and you can mostly find this in the Zone 4 of the USDA. It features white flowers, and they do tend to become light yellow as time passes. You don’t feel any fragrance if you check them out, but you will see that these are rather impressive and visually attractive.

The flowers appear during late spring, and they do tend to blossom well into the fall season. You will have to note that this Honeysuckle can easily adapt to gardens that have a bit of trouble, so it can easily stay in full sun if necessary. Still, it does prefer shade, and that’s very important.

d. Pink Lemonade Honeysuckle

Lonicera x heckrottii is named the Pink Lemonade honeysuckle. Some also call it the goldflame. Like most Honeysuckles, this one also blossoms during the spring, and it will thrive until the fall. It has a very distinct tubular pink flower, and the interior is creamy yellow.

Butterflies, as well as hummingbirds, thrive here, and they enjoy this type of Honeysuckle. This is one of the ornamental options, and it can easily climb the fence, arbor and so on. You can sometimes find it in partial shade, but it can grow in zone 4 and zone 5. It usually focuses on growing in regions with a soil that is very well drained.

e. Japanese Honeysuckle

Lonicera japonica is the Japanese Honeysuckle, and you can find it in the USDA zone 5. It tends to cover a wide area, and it can be seen as a plant that’s rather invasive. It can easily choke your other plants.

2. Caring for Honeysuckle Vines

Caring for the Honeysuckle can be rather easy. You need to prune them as well since they can be rather invasive most of the time. Shaping and shearing will be very important here, with pruning being good during the winter.

Keep in mind that the vines will end up popping up again during the spring, so try to do pruning annually. If you do this properly, the Honeysuckle will have the nectar and blooms you want!

3. How to Grow a Honeysuckle Vine

Growing the Honeysuckle is easy, but it does come with a bit of challenge. Using the softwood cuttings is a very good idea here, so try to keep that in mind.

We recommend you to use the new growth that comes from another vine. Start with cuttings during the early summer or late spring. If you want to make sure that the vine has a full sap, do that during the morning.

a. Step One to Grow a Honeysuckle Vine

You will have to read the instructions, and then you have to make sure that the supplies are ready before you start the process. You will require the following:

  • Potting soil + water
  • A few small flower points
  • Clear plastic bags
  • A sharp knife, cutters also work well here
  • Use an elastic band for each of the pots
  • A rooting hormone will be needed as well
  • Bamboo skewers and a box cutter or sharp scalpel will be optional
  • Plant tags
  • Add the moistened potting soil in the pots and then put everything in its place

Step Two to Grow a Honeysuckle Vine

  • Here you should use a 6-8″ cutting that comes from a regular vine, and you should do a slanted cut. Make sure that you will not crush any stem while you do the cutting process
  • Once that is done, remove flowers
  • At this point, you have to clip the cutting, use a sharp knife and perform the task right under the leaf node
  • Lastly, you will have to remove the two sets of lower leaves you can find below

Step Three to Grow a Honeysuckle Vine

While this particular step is not pivotal, you have to do it as people did it a few years ago and it works rather well. If you have steady hands, make sure that you are scraping a bit of the stem’s outer layer. You should do this at the leaf node base.

Step Four to Grow a Honeysuckle Vine

  • Place a bit of rooting hormone in the clean dish
  • You should put the bottom stem within in
  • Once you are done, try to discard the leftovers
  • If possible, try to use a skewer that will create a hole in the potting soil and try to add that a bit deeper

Step Five to Grow a Honeysuckle Vine

  • Once you finalize cutting planting, you should consider adding in the bamboo skewers into the pot.
    Step Six
  • Use a plastic bag to cover the pot and use elastic bands to cover everything properly.
    Step Seven
  • Try to put this in the indirect sun. The soil should stay moist, if possible you can try to add some inside bag condensation
  • You can form roots in just a few weeks, but make sure that you double check the process just to be safe!
  • You can take these away from their pots when they have at least 1” in length


4. 6 Mistakes to Avoid When Growing Honeysuckle Vine

A thing to note is that most of the Honeysuckle plants tend to be either twinning bines or arching shrubs. This will enable the plant to create trumpet-shaped flowers, sweet nectars and a scent similar to honey.

This is why hummingbirds and butterflies, even humans tend to be very attracted to these!
It’s important to note that the vine isn’t that hard to grow. You just need to use the right approach here.

There are many mistakes you can do at this particular time, which is why you need to have the right approach!

a. Planting Too Late in the Season

You need to plant the Honeysuckle during the spring. The climate has to be cool. However, you should wait until frost goes away, just to be safe.

Also, when you have the right timing, make sure that you place the Honeysuckles in direct sun or at least offer them a partial sun exposure. You have to plant the Honeysuckle at around 18 inches, and you need to add compost or fertilizer on the final inches.

b. Imbalanced Amounts of Water

Even if it doesn’t seem like that, these vines do have water sensitivity. If you plant the Honeysuckle, you want to make sure that the water amounts you share are balanced and the right ones.

During the summer you will have to share less water, however when you plant the Honeysuckle, it will require a bit more water. Don’t share water equally throughout the year, as that is not a good idea.

As you can see, the focus is on making sure that this plant has the right amount of moisture. If possible, add some shredded bark, pine needles, and dry leaves for around 2 inches, as this is the perfect place to thrive for the Honeysuckle!

c. Incorrect Use of Fertilizer

Add the balanced fertilizer at the beginning. Do try and use a controlled variety and then during the middle of the summer you can opt for the liquid fertilizer. Obviously, you want to avoid fertilizing too much. This is a mistake and one that you should avoid.

So, try to use a balanced amount each time, as that’s what matters the most! In case you add too much, you will see that the foliage has to thrive, something that will give an impression that the vine seems rather successful. It may be like that, but the long term results are not that great this way. You have to retain a soil pH between 6.1 and the higher value of 7.8.

Using too much fertilizer will still cause the foliage to thrive, which will give the initial impression of a successful vine, but the excess fertilizer will negatively impact flowering down the line. Keep the soil pH between 6.1 and 7.8.

d. Poor Timing When Pruning


If you opt for pruning, make sure that you do it at the right time. If you start pruning too fast, you will lower the bloom amount, and this may even kill the plant. Instead, you need to allow the vine to grow before you prune it. Do try and prune it during the growing season.

Remove the bloomed and old flowers while pruning. You should also make sure that you remove the older shoots as this will boost flowering. Cutting the plant back around 1/3 before you start pruning is essential. You should perform this task at the end of February and during March.

e. Mold From Poor Ventilation

Keep in mind that Honeysuckles do have a problem with mold and mildew. If you want to deal with these, you will need to offer proper air movement. So, placing the plant in open air can be a very good idea.

f. Improper Support

The Honeysuckle vines will grow a lot, so you have to make sure that you offer them a good support system. Once you offer them that, there shouldn’t be any problem.
Also, try to make sure that the arbor or trellis is in place before you start planting. This will remove any plant damage problems, and that will be great.
Make sure that you place the plant at around 6-12 inches afar when compared to the support. The plant should be tied to the support using a stretchy material. Nylon hosiery can be great here, use the cross material here to prevent the stem from rubbing.

One Response

  1. mia June 4, 2017

Leave a Reply